Apogee Printdrive Series 3 (Update E) and Epson 10000

[Zmey]

I'm using Apogee Apogee Printdrive Series 3 (Update E) with Galileo VS
and i have plotter Epson 10000 for impose proofing. Apogee Apogee Printdrive Series 3 (Update E) supports Epson 10000 as a proofer device.

But :-( then i try to print something on Epson 10000
i have as a result such log:


10/26/2005 10:23:35 PM START JOB imaging to 'Epson' with media '614'
10/26/2005 10:23:35 PM Proof Density : 80%
10/26/2005 10:23:35 PM Proof Dot Gain File : '\\apogee3\PrintDrive
Data Share\CMS\ProoferProfiles\Uncompensated.ctr'
10/26/2005 10:23:36 PM No information for halftone
ABS_TRAD_1200_100_RND.C.
10/26/2005 10:23:37 PM No information for halftone
ABS_TRAD_1200_100_RND.M.
10/26/2005 10:23:38 PM No information for halftone
ABS_TRAD_1200_100_RND.Y.
10/26/2005 10:23:38 PM No information for halftone
ABS_TRAD_1200_100_RND.K.
10/26/2005 10:23:39 PM Proof Keep Pure Off
10/26/2005 10:23:39 PM Proof Color Profiles [target
('\\apogee3\PrintDrive Data
Share\CMS\TargetProfiles\StandardEURO-Abs.icm')] proof device ['Epson'
('\\apogee3\PrintDrive Data
Share\CMS\ProoferProfiles\ICM-24-6C-AIPP90-HQ-720.icm')]
10/26/2005 10:23:39 PM Job contains 0 unique file objects
10/26/2005 10:23:39 PM START MEDIA 'Tray 1': [Sheet 1 FRONT 'cmyk'
Copy: 1]
10/26/2005 10:23:39 PM Media preparation deferred due to
PRE-EXISTING CONDITION.
10/26/2005 10:23:39 PM END MEDIA 'Tray 1': [Sheet 1 FRONT 'cmyk' Copy:
1]
10/26/2005 10:23:44 PM START IMAGING: Sheet 1 FRONT 'cmyk' Copy: 1
10/26/2005 10:23:44 PM SET Parameter 'ImageQuality' = '9'
10/26/2005 10:23:44 PM SET Parameter 'BitsPerPixel' = '8'
10/26/2005 10:23:44 PM SET Parameter 'Resolution' = '[360.00
360.00]'
10/26/2005 10:23:44 PM SET Parameter 'ColorModel' = '8'
10/26/2005 10:23:44 PM SET Parameter 'UniDirectionState' = '0'
10/26/2005 10:23:44 PM Color Lookup Table Path: '\\apogee3\PrintDrive
Data Share\LUT\INK-24-6C-AIPP90-HS-720.txt'

and the command error that indicates my plotter

Any suggestions? And thanks for your future help

[steveagfa]

Zemy:

I'm not tech support -
but there is an Apogee users forum
that quite actively exchanges tips and tricks.

Talk with your Agfa reseller about gaining
access to the site. It has a broader, and
more focused, exchange.

I hope this helps.

Steve.