|
We've been running a 7600 since Jan04. Think the log says 4.5 Kms throughput since then. Had 1 major service about 18 mnths ago. they clean all the accumulated gunk out. Had some sort of filter unit replaced a few weeks ago. Due for new print heads within the next year. hardest part is finding a good service tech. The latest advice from the guy we use is to mainly use the 3 second clean, but occasionally use the power clean. This is contrary to the advice we got when it was installed, which was to always use Power Clean. This is not so smart, apparently. If your combination of 3 sec+power[occasionally], isn't clearing your problem, you may need some sort of service on it. Without knowing your usage and age of unit, hard to comment further.
you sure get to rely on them spitting good stuff though!
__________________
Fuji Luxel V6 violet [photopolymer] CTP_30 Milliwatt. In-house prepress. Black Magic proofing.
%%flushing rest of job%%
|
