|
DPX
hi ,the ppd goes in the mac not the dpx and quark should be fine.i suspect that the margin error is because the page sent is too big for the plate .ie if the plate size is 340x485 as for the ryobi 3302 ,then an A3 extra page and witha specified margin will be between 19 and 22mm so you havnt got the space so reduce the page size in the page setup /page layout and make sure the rotation is correct . try reducing the margin.. what im worried about is the fact that you went to rip defaults so you may have to recreate the setups and media settings. check that the media is right . quit ripmate and go in to rip manager ,then sellect dpx420 tap and on the pulldown menu select media manager. you should have two cassetes saYING SOMETHING LIKE DOTPRINT 400 , WIDTH 402 LENGTH 61. THEN SELECT EDIT CASSETTES AND EDIT MEDIA , TRANSPORT VAC 4 EXPO VAC 25 PROC SPEED 20 CORE 200 TEMP 30 DRY 40 . ALSO IN EDIT CASSETTE IS PUNCHING SELECTED? HOPE THIS HELPS ...
|
