|
I am working to G7 standard, well not certifiied yet but it is the goal. My quick break down is this
G7 is the standard I m shooting for on the proofer and press
The proofer can be set up to meet this standard using profiling software too meet the standard.
The press is then set up using the same stndard and a goal of gray balance using profile software.
The idea is to treat the press like a proofer and manage output curves to match the G7 standard.
This give you a proofer that is meeting the same standard you are shooting for on press as well. The G7 standard is taking the same icc profileing ideas and aplying to a press. So in theory you are not matching proofer to press or press to proofer you atching a G7 standard on both devices.
Yes you would have mutliple curves for different presses and paper thus creating each individual signature that runs to the same standard on any device
__________________
3-MAC G5
Signastaion 9
Delta 7
Best color Proof on HP 5000 & EPSON 9800
Fuji Luxel Blue Violet CTP GTO plate and SM102
2 Polar cuttters
2 MBO26 continuous feeders
1 MBO 20
1 ST90 Saddle stitcher
|
